Intermec PC43t Manual de usuario Pagina 83

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 190
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 82
Chapter 2 — Set Up the Printer
PC23 and PC43 Desktop Printer User Manual 69
Calculate RFID Tag Position
You can perform a manual calculation to come up with an estimate of
the RFID Tag Position. Because this value is an estimate, you may need
to slightly adjust the calculated value to achieve the best results.
1 Make sure Start Adjust and Stop Adjust are set to 0.
2 Measure the yChip value, which is the distance between the RFID
chip and the media edge aligned with the tear bar.
3 Note the yAntDist value for your printer:
PC23d: 280 dots, 35 mm, 1.378 in
PC43d: 260 dots, 33 mm, 1.299 in
PC43t: 256 dots, 32 mm, 1.260 in
4 Use this formula to calculate the estimated Tag Position:
TagPosition=yChip - yAntDist
Z$IJQ
/FYUMBCFM
3'*%DIJQ
.FEJBFEHF
BMJHOFEXJUI
UFBSCBS
-BCFMUPQ
PGGPSN
Vista de pagina 82
1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 189 190

Comentarios a estos manuales

Sin comentarios