Intermec EASYCODER PD4 Manual de usuario descargar pdf (Pagina 95)

Intermec EasyCoder PD4—User’s Guide 85

Appendix C—Interfaces

USB Interface

is printer supports USB v1.1 (also called USB 2.0 full speed). To use

the USB interface for printing from a PC, you need a special Intermec

USB printer driver installed in your PC.

e printer is a so called “self-powered device.” We recommend that you

only connect one printer to each USB port on the host, either directly or

via a hub. Other devices, like a keyboard and a mouse, can be connected

to the same hub. If you need to connect more than one Intermec USB

printer to a host, you should use diﬀerent USB ports.

Using a USB Class A/B cable, connect the Class A plug to your PC or

hub and the Class B plug to your printer.

ere is no communication setup for the USB port.

USB Class A connector.

Connect to PC or hub.

USB Class B connector.

Connect to USB receptacle on the printer’s rear plate.

1 2 ... 90 91 92 93 94 95 96 97 98 99 100

Sin comentarios

Intermec EASYCODER PD4 Manual de usuario Pagina 95