Intermec EASYCODER PL4 Manual de usuario descargar pdf (Pagina 59)

EasyCoder PL4 Printer User’s Guide 59

Memory/Communications Specifications (continued)

Optional wireless

communications

Bluetooth compatible 2.4 GHz link

Wireless LAN capabilities comply with 802.11b

protocols

Label Specifications

Label/tag width 50.8 mm to 104.1 mm (2 inches to 4.1 inches)

Maximum

label/tag length

508 mm (20 inches) with standard memory

Inter-label gap 2 mm to 4 mm (3 mm preferred)

0.08 inch to 0.16 inch (0.12 inch preferred)

Label thickness 0.064 mm to 0.165 mm (0.0025 inch to 0.0065

inch)

Tag thickness 0.152 mm (0.0060 inch) maximum

Label roll size:

maximum

diameter

66.7 mm (2.625 inch) O.D.

Inner core

diameter

19 mm (0.75 inch) minimum; 35.05 mm (1.38 inch)

minimum diameter for linerless media

Use Intermec-brand direct thermal media that is

outside wound. Media may be reflective (black mark)

sensing or transmissive (gap) sensing, die-cut,

continuous, fanfold, or linerless.

For die-cut labels, use only full auto dies.

Media

requirements

The reflective media black marks should extend past

the centerline of the roll.

Minimum Black Mark Dimensions:

Mark width: 12.7mm (0.5 inch) perpendicular to

edge of media, centered within the width of the roll.

Mark length: 2.4 mm (0.094 inch) parallel to edge of

media.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 65

Sin comentarios

Intermec EASYCODER PL4 Manual de usuario Pagina 59