Intermec CK60 Manual de usuario descargar pdf (Pagina 70)

Chapter 3 — Configuring the Computer

56 CK60 Mobile Computer with Windows CE User’s Manual

4 When you clear (uncheck) Enable scanner port, the SF51 is

disconnected from the CK60. Check Enable scanner port again to

reconnect.

5 Select File > Save Settings to put these settings into effect.

If you want to rename these connections to descriptions more suitable for

your situation, press the stylus on each SF51 Scanner connection for a pop-

up menu, then select Rename. Enter the new description, then press Enter

to save your entry.

When the SF51 is connected, configuration changes take effect

immediately. When the SF51 is not connected, configuration changes take

effect once the SF51 is reconnected.

Configuring Bluetooth Communications for Wireless Scanners

You can send and receive information to devices wirelessly using the

Bluetooth radio. The Bluetooth technology uses short-range radio links and

allows for communications over a 10 m (32.8 ft) range.

Enabling Bluetooth

On the CK60, use the Intermec Settings applet to enable Bluetooth

communications before you configure the wireless scanner. See “Enabling

Bluetooth” on page 53 to enable Bluetooth.

To allow incoming connections from wireless scanners

1 In the Intermec Settings applet, tap (+) to expand Communications >

Bluetooth > Power.

2 Tap (+) to expand Discoverable, then select Enable.

3 Tap (+) to expand Connectable, then select Enable.

4 Select File > Save Settings, then File > Exit to close the applet.

Note: To avoid incoming connections, disable both the Discoverable and

the Connectable options.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 123 124

Sin comentarios

Intermec CK60 Manual de usuario Pagina 70