search

Intermec CK61 Manual de usuario Pagina 92

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 126
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
    •
  • MARCADORES
    • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 91
Chapter 4 — Troubleshooting and Maintaining the CK61
80 CK61 Mobile Computer User’s Manual With Windows CE
Problems While Operating the CK61
Problem Solution
You press the Power button and
nothing happens.
• Make sure the backlight is on.
• Make sure you have a charged battery that is installed
correctly. For help, see “Charging the Battery” on
page 5.
• The battery may be discharged. Replace the battery with a
spare charged battery, or charge the battery.
• Perform a warm boot or a cold boot.
The Battery status LED is on. The battery status LED indicates the following states:
• If the battery status LED is a steady green, the battery is
more than 95% charged and computer is on a charger.
• If the battery status LED is blinking red, then the battery
is low. Replace or charge the battery.
• If the battery status LED is a steady red, the main battery
is on charge.
The computer appears to be locked
up and you cannot enter data.
• Press the power key to turn off the computer, then press
the power key again to turn it on.
• Press and hold the power key ten seconds to warm boot
the computer.
• Try reloading the firmware. See “Upgrading the System
Software” on page 72.
• If the computer does not boot or reset, contact your
Intermec representative for help.
Problems With Wireless Connectivity
Problem Solution
When you turn on the computer
after it was suspended for a while
(10 to 15 minutes or longer), it can
no longer send or receive messages
over the network.
Host may have deactivated or lost current terminal
emulation session. In a TCP/IP direct connect network, turn
off the “Keep Alive” message from host to maintain the TCP
session while the computer is suspended.
The CK61 is connected to the
network and you move to a new site
to collect data. Your CK61 now
shows you are not connected to the
network.
Move closer to an access point or to a different location to
reestablish communications until you reconnect with the
network. Any data collected while out of range is
transmitted over the network.
Vista de pagina 91
1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 125 126

Comentarios a estos manuales

Sin comentarios
Relacionado con productos y manuales para Computadoras móviles de mano Intermec CK61
Computadoras móviles de mano Intermec CN3e Manual de usuario   (142 paginas)
Computadoras móviles de mano Intermec CN3e Manual de usuario   (148 paginas)
Computadoras móviles de mano Intermec CN3A Manual de usuario      (2 paginas)
Computadoras móviles de mano Intermec CK3A Manual de usuario   (136 paginas)
Computadoras móviles de mano Intermec CN50 Manual      (2 paginas)
Computadoras móviles de mano Intermec CK71 Manual de usuario   (196 paginas)
Computadoras móviles de mano Intermec CN50 Manual       (2 paginas)
Computadoras móviles de mano Intermec CS40 Manual de usuario   (152 paginas)
Computadoras móviles de mano Intermec CN4 Manual de usuario   (145 paginas)
Computadoras móviles de mano Intermec CN3e Manual de usuario       (2 paginas)
Computadoras móviles de mano Intermec CN4E Manual de usuario        (2 paginas)
Computadoras móviles de mano Intermec CK61 Manual de usuario   (128 paginas)
Computadoras móviles de mano Intermec CK31 Manual de usuario   (2 paginas)
  • Ewql Gioteck Alpatronix RF Shoestring Astronomy
  • Dell Lentes de las cámaras Definitive Technology Inicio conjuntos de audio NEC Gradas de equipos AV Avanti Cocinas Faber Campanas De Cocina
  • Emerson GXT3-240TBATTCE ONKYO SKW-204 LG BD370 ViewSonic VX1945wm Sony CDX-GT565UV
  • LG C3400 Manual de usuario Frigidaire FGRC0644U1 Hoja de especificaciones LG BH9630TW Manual de usuario Samsung CLX-3305FN Manual de usuario Bauknecht WATK Prime 8612 Guía de uso y cuidado