Intermec CV61 Guía de usuario descargar pdf (Pagina 52)

Chapter 4 — Configure the Computer

40 CV61 Vehicle Mount Computer (Windows 7) User Guide

1 Make sure you have created a custom profile for your computer.

2 Tap Start > All Programs > Intermec > Profile Settings.

3 Select the profile you want to enable.

About Network Communications

You can easily add the computer to your wireless or wired data

collection network. You can connect your computer using:

• 802.11a/b/g/n radio communications.

• Bluetooth communications.

• USB and serial communications.

Configure 802.11a/b/g/n (Wi-Fi) Radio Communications

The computer contains an 802.11 radio to transfer data using wireless

communications and to support the TCP/IP network protocols. This

section of the manual assumes that your wireless network is set up,

including your access points.

By default, the 802.11 radio is enabled. If it is disabled, use the

following procedure to enable the Wi-Fi radio using Intermec Settings.

1 From the Intermec Settings main menu, tap Communications >

802.11 Radio > Radio Enabled.

Note: For more information on how to create your own custom

profiles, go to the Intermec Developer Center website at

www.intermec.com/developer/resources/CustomProfiles.aspx

Make sure all components with antennas are at least 30 cm (1 ft)

apart when power is applied. Failure to comply could result in

equipment damage.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 119 120

Sin comentarios

Intermec CV61 Guía de usuario Pagina 52