Intermec CV61 Guía de usuario descargar pdf (Pagina 70)

Chapter 4 — Configure the Computer

58 CV61 Vehicle Mount Computer (Windows 7) User Guide

8 If you choose PEAP or EAP-FAST:

a Load a root certificate of the authentication server on your

computer. For help, see “Load a Certificate” on page 59.

b Tap Settings. The Properties screen appears.

c Select Validate server certificate.

d Tap the User Credentials tab.

e Select Use saved user name and password, and enter a User

Name and a Password. When you are finished, type in your

password again in Confirm Password.

f Tap OK to exit the Properties screen.

g Tap OK to save the Microsoft Security settings.

9 If you choose Smart Card or other certificate:

a Load a root certificate of the authentication server on your

computer. For help, see “Load a Certificate” on page 59.

b Tap Settings. The Properties screen appears.

c Select Validate server certificate.

d Tap OK to exit the Properties screen.

e Tap OK to save the Microsoft Security settings.

Configure Static WEP Security With Microsoft

Use the following procedure to configure static WEP security with

Microsoft security. Intermec recommends that you use WPA2-PSK

instead of WEP if possible.

1 Make sure the communications and radio parameters on your

computer are configured.

2 Tap Start > Control Panel. The Control Panel appears.

3 In the View by: drop-down menu, select either Large or Small

icons.

4 Tap Network and Sharing Center > Manage Wireless Networks

and select the wireless network you want to configure.

5 In the Security type, choose No authentication (Open).

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 119 120

Sin comentarios

Intermec CV61 Guía de usuario Pagina 70