Intermec IF2 Manual de usuario descargar pdf (Pagina 72)

Chapter 4 — Managing, Troubleshooting, and Upgrading the IF2

62 IF2 Network Reader User’s Manual

Restoring Default Settings Using the Reset Switch

If you are having problems with the IF2, you can press the reset switch

to restore the default settings to the IF2.

To restore defaults via a serial connection

1 Make sure the IF2 is powered on.

2 Using a paper clip, push and hold the reset switch for three

seconds. The LEDs on the IF2 flashes.

3 Release the reset switch. The IF2 reboots and restores the default

configuration.

Restoring Default Settings Using a Serial Connection

If you are having problems with the IF2, you can use a serial

connection to restore the default settings to the IF2.

To restore defaults via a serial connection

1 Open a serial connection to the IF2. For help, see “Opening a

Serial or USB Connection to the IF2” on page 54.

2 In the login field, type restore_defaults and then press

Enter.

3 In the Password field, press Enter. The IF2 reboots and the default

settings are restored.

Reset switch

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 103 104

Sin comentarios

Intermec IF2 Manual de usuario Pagina 72