Intermec CN4 Manual de usuario descargar pdf (Pagina 112)

Chapter 4 — Troubleshooting and Maintaining the CN4

100 CN4 Mobile Computer User’s Manual

4 Insert the battery pack into the CN4, and immediately press and

hold the Power button and both buttons on the left side.

5 Continue to hold the Power button and both buttons on the left

side until a Warning message appears on the display.

6 Release the Power button and both buttons on the left side, read

the message, and press either button on the right side to continue.

7 Wait for the CN4 to load files from its ROM.

Cleaning the CN4

To keep the CN4 in good working order, you may need to clean the

imager window, color camera window, and the touch screen. Clean

the windows and the touch screen as often as needed for the

environment in which you are using the CN4. To clean the CN4, use a

solution of ammonia and water.

To clean the imager window, camera window, and touch screen

1 Press the Power button to suspend the CN4.

2 Dip a clean cloth towel in the ammonia solution and wring out

the excess.

3 Wipe off the imager window, camera lens, and flash area. Do not

allow any abrasive material to touch these surfaces.

4 Wipe dry.

Note: You can also clean boot the CN4 using the SmartSystems

console. To clean boot the CN4 using the SmartSystems console,

right-click the CN4 and select Intermec Power Tools > Clean Boot

Device.

There are no user-serviceable parts inside the CN4. Opening the

CN4 will void the warranty and may cause damage to the internal

components.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 144 145

Sin comentarios

Intermec CN4 Manual de usuario Pagina 112