Intermec CN4 Manual de usuario descargar pdf (Pagina 71)

Chapter 2 — Connecting and Configuring the CN4

CN4 Mobile Computer User’s Manual 59

3 Choose Ethernet or Wireless from the connection type list.

4 Choose Ping my gateway or DHCP server if you are using

DHCP. Or, choose Ping the host address below and enter the

host address in the entry field.

5 Tap Ping. The ping test runs and checks your connection. If the

connection is OK, “Connection Validated” appears.

To check overall connection status

1 Tap the iConnect icon ( ) in the lower right corner of the Today

screen.

2 Choose Status > Ethernet or Wireless. A message box appears.

iConnect checks these items in order:

• Network connection (Ethernet or wireless) enabled

• MAC address of the CN4 network adapter

• MAC address of the associated host

• IP address of the CN4

• Ping Status

3 Tap Try Again to test the connection again.

If you are having trouble with your wireless connection, you can use

iConnect to verify available access points and networks, check signal

strength, and view other diagnostics. For help, see “Checking 802.11

Network Status” on page 94.

Configuring Wireless Security

The CN4 provides four types of security for your wireless network:

• Wi-Fi Protected Access 2 (WPA2™)

• Wi-Fi Protected Access (WPA)

• 802.1x

• WEP

Note: If you choose Exit iConnect from the menu, the desktop icon

disappears. To restore the iConnect desktop icon, warm boot the

CN4.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 144 145

Sin comentarios

Intermec CN4 Manual de usuario Pagina 71