Intermec CN3e Manual de usuario descargar pdf (Pagina 107)

Chapter 4 — Troubleshooting and Maintaining the CN3

CN3 Series Mobile Computer User’s Manual for Windows Mobile 5.0 95

5 Continue to hold the Power button and both buttons on the left

side until a Warning message appears on the display.

6 Release the Power button and both buttons on the left side, read

the message, and press either button on the right side to continue.

7 Wait for the CN3 to load files from the miniSD card.

Cleaning the CN3

To keep the CN3 in good working order, you may need to clean the

imager window, color camera window, and the touch screen. Clean

the windows and the touch screen as often as needed for the

environment in which you are using the CN3. To clean the CN3, use a

solution of ammonia and water.

To clean the imager window, camera window, and touch screen

1 Press the Power button to suspend the CN3.

2 Dip a clean cloth towel in the ammonia solution and wring out

the excess.

3 Wipe off the imager window, camera lens, and flash area. Do not

allow any abrasive material to touch these surfaces.

4 Wipe dry.

Note: You can also clean boot the CN3 using the SmartSystems

console. To clean boot the CN3 using the SmartSystems Console,

right-click on the CN3 and select Intermec Power Tools > Clean

Boot Device.

There are no user-serviceable parts inside the CN3. Opening the

CN3 will void the warranty and may cause damage to the internal

components.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 141 142

Sin comentarios

Intermec CN3e Manual de usuario Pagina 107