
Chapter 5 — Network Support
136 CN3 Mobile Computer User’s Manual
Activating the Phone
The GSM/EDGE phone is activated via a SIM card that you can purchase
from your network provider, and inserted in the miniSD/SIM cavity in the
back of your CN3. Contact your Intermec representative for more
information.
To insert the SIM card
1 Press the power switch to suspend the CN3, then remove the battery
pack from the back of the CN3.
2 Remove the two screws on the miniSD/SIM card slot door. Note the
screws to this door are to be torqued to 1.5 in-lbs.
3 Gently lift the door to the card slot, then with the metal contacts facing
down, insert the SIM card into its card slot in the door.
4 Press the miniSD/SIM card slot door down, insert the two screws,
reinsert the battery pack, then press the power switch.
Once the door to the miniSD is opened (for changing, installing, or
removing the SIM or miniSD card); a cold-boot is performed.
Using the GSM/EDGE Phone
To access the application that processes your phone calls
•Tap Start > Settings > the Phone desktop icon from the Personal tab,
or
•Tap Start > Phone.
miniSD/SIM door
SIM card slot
Comentarios a estos manuales