Intermec CN3 Manual de usuario Pagina 21

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 212
  • Tabla de contenidos
  • SOLUCIÓN DE PROBLEMAS
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 20
Chapter 1 — Using the Computer
CN3 Mobile Computer User’s Manual 7
When a bar code label is successfully read, a high beep is emitted and the
Scan LED lights briefly. Release the Scan button.
Improving the Performance of the Area Imager
If you have problems scanning a bar code with the 2D imager, try following
some of these tips to improve the performance of your imager:
Keep your hand as steady as possible while scanning a label.
Position the imager as close to the bar code as possible while still being
able to capture the entire bar code.
Enable only the bar codes that you need to use every day.
•Tap Start > Settings > the System tab > the Intermec Settings icon to
access the applet.
Tap (+) to expand Data Collection > Internal Scanner > Imager
Settings > Predefined Modes, then select one of the following:
Select this option: If you are scanning:
1D only 1D labels
1D and 2D Standard all other cases
1D and 2D Bright Environment in high ambient light (like outdoors in sunshine)
1D and 2D Reflective Surface glossy labels
Select Custom to access all standard imager settings such as “Lighting Goal” or “Lighting
Mode.” More information about these settings, commands, and parameters are found in
the Intermec Computer Command Reference Manual available from the Intermec web site
at www.intermec.com.
Good Scan LED
Vista de pagina 20
1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 211 212

Comentarios a estos manuales

Sin comentarios