Intermec CK31 Manual de usuario descargar pdf (Pagina 88)

Chapter 2 — Configuring the CK31

CK31 Handheld Computer User’s Manual 71

server. In the 802.1x framework, traffic cannot pass through an

Ethernet hub or wireless network access point until it

successfully authenticates itself.

The station must identify itself and prove that it is an authorized

user before it is actually allowed to use the LAN. LEAP also

delivers a session key to the authenticated station, so that future

frames can be encrypted with a key that is different than keys

used by other sessions.

To use LEAP security, you need:

• a RADIUS server.

• Cisco access points.

LEAP security is not supported with Microsoft security.

To enable LEAP security on your CK31

1 Make sure you have selected Funk as your security choice.

2 Make sure you have configured the communications and

radio parameters on your CK31.

3 From Intermec Settings, choose Communications > 802.11

Radio > Funk Security > Profile.

4 For 8021x, choose LEAP and then press Enter.

5 For Association, choose Open, WPA, WPA2, or Network

EAP and then press Enter. Encryption automatically defaults

to TKIP if you choose WPA, to AES if you choose WPA2,

and to WEP if you choose Open or Network EAP.

6 For Prompt for Credentials, choose Enter credentials now.

7 Select User name, type your user name, and then press

Enter.

8 Select User Password, type a user password, and then press

Enter.

9 Exit Intermec Settings.

Using Static WEP Security

The CK31 uses the Wired Equivalent Privacy (WEP) protocol

to add security to your wireless network based on the 802.11b

standard.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 207 208

Sin comentarios

Intermec CK31 Manual de usuario Pagina 88