Intermec CK31 Manual de usuario descargar pdf (Pagina 89)

Chapter 2 — Configuring the CK31

72 CK31 Handheld Computer User’s Manual

To use WEP security, you need:

• a CK31 handheld computer with an 802.11b/g radio.

• an access point with an 802.11b/g radio.

Configuring Static WEP Security With Funk Security

1 Make sure you have selected Funk as your security choice.

2 Make sure you have configured the communications and

radio parameters on your CK31.

3 Open Intermec Settings.

4 Choose Communications > 802.11 Radio > Funk Security

> Profile.

5 For Association, choose Open and then press Enter.

6 For Encryption, choose WEP and then press Enter.

7 For 8021x, choose None and then press Enter.

8 Define a value for the keys you want to use. You can define

up to four keys (Key 1 through Key 4).

Enter an ASCII key or a hex key that is either 5 bytes or 13

bytes long depending on the capability of the radio. Set a 5-

byte value for 64-bit WEP or a 13-byte value for 128-bit

WEP. Hex keys must be preceded by 0x and contain 5 or 13

hex pairs.

9 For Transmit key, choose the key you want to use for

transmitting data.

10 Exit Intermec Settings.

Configuring Static WEP Security With Microsoft Security

1 Make sure you have configured the communications and

radio parameters on your CK31.

2 Open Intermec Settings.

3 Choose Communications > 802.11 Radio > Microsoft

Security.

4 For Network Authentication, choose Open.

5 For Data Encryption, choose WEP.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 207 208

Sin comentarios

Intermec CK31 Manual de usuario Pagina 89