Intermec CK30 Manual de usuario descargar pdf (Pagina 62)

Chapter 2 — Configuring the CK30

48 CK30 Handheld Computer User’s Manual

Configuring 802.11b/g Radio Communications

Make sure all components with antennas are at least 30 cm

(1 ft) apart when power is applied. Failure to comply could

result in equipment damage.

The wireless CK30 has an internal 802.11b/g radio to transfer

data using wireless communications. This section of the manual

assumes that you have already set up your wireless

communications network including your access points. If you

are using a UDP Plus network, you also need to have your

Intermec Application Server communicating with a host

computer.

Your CK30 supports these network protocols:

• TCP/IP

• UDP Plus

The next sections explain the parameters you need to configure

for the CK30 to work in your wireless network.

Configuring the Network Parameters for a TCP/IP Network

In a TCP/IP network, the CK30 communicates with a host

computer directly using TCP/IP. The access point acts as a

bridge to allow communications between the wired network and

the wireless network.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 214 215

Sin comentarios

Intermec CK30 Manual de usuario Pagina 62