Intermec CK30 Manual de usuario descargar pdf (Pagina 72)

Chapter 2 — Configuring the CK30

58 CK30 Handheld Computer User’s Manual

WPA runs in Enterprise (802.1x) mode or PSK (Pre-Shared

Key) mode:

• In Enterprise mode, WPA provides user authentication using

802.1x and the Extensible Authentication Protocol (EAP).

That is, an authentication server (such as a RADIUS server)

must authenticate each device before the device can

communicate with the wireless network.

• In PSK mode, WPA provides user authentication using a

shared key between the access point and the CK30. WPA-

PSK is a good solution for small offices or home offices that

do not want to use an authentication server.

To use WPA security, you need:

• an authentication server (Enterprise mode only).

• an access point with an 802.11b/g radio that supports WPA.

• a CK30 with the 802.11b/g radio and the 802.1x/WPA

security option.

The CK30 also supports Wi-Fi Protected Access 2 (WPA2) if

you are using Funk security. WPA2 is a product certification

available through the Wi-Fi Alliance that certifies wireless

equipment is compatible with the 802.11i standard. WPA2 uses

the Advanced Encryption Standard (AES) for data encryption.

WPA2 runs in 802.1x (Enterprise) mode or PSK (Pre-Shared

Key) mode:

• For WPA2-802.1x mode, WPA2 requires authentication in

two phases; the first is an open system authentication and the

second uses 802.1x and an Extensible Authentication

Protocol (EAP) authentication method.

• In PSK mode, WPA2 provides user authentication using a

shared key between the authenticator and the CK30. WPA2-

PSK is a good solution for small offices or home offices that

do not want to use an authentication server.

Configuring WPA Security With Funk Security

Use these procedures to set WPA-802.1x, WPA2-802.1x, WPA-

PSK, or WPA2-PSK security on your CK30 with Funk security.

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 214 215

Sin comentarios

Intermec CK30 Manual de usuario Pagina 72