Intermec PB22 Manual de usuario descargar pdf (Pagina 20)

Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer

8 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide

To change the printer language using IPL and a communications

program

1 Connect your printer to your PC using a serial cable. For help, see

“Connecting the Printer Through the Serial Port” on page 31.

2 Start a communications program like HyperTerminal.

3 Send the enable administrator rights command:

<STX><ESC>.y, su -p pass admin <ETX>

4 Send the run command to change the printer language:

<STX><EXC> .y,setlanguage FP -r<ETX>

To change the printer language using ESC/P and a communications

program

1 Connect your printer to your PC using a serial cable. For help, see

“Connecting the Printer Through the Serial Port” on page 31.

2 Start a communications program like HyperTerminal.

3 Enter U-shell. Press the ESC key and type:

{SYS:USH}

4 Send the enable administrator rights command:

su -p pass admin

5 Send the run command to change the printer language:

setlanguage IPL -r

To change the printer language using the display and Fingerprint

1 Press the Setup button. The Setup menu system appears.

2 Press until you reach Print Defs.

3 Press to enter the Print Defs menu system.

4 Press until you reach CMD Language.

5 Press to enter the CMD Language menu system.

6 Press until you see the language of you want to select.

7 Press to select the printer language.

8 Cold boot the printer:

a Remove the printer battery.

b Replace the printer battery.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 103 104

Sin comentarios

Intermec PB22 Manual de usuario Pagina 20