Intermec PB22 Manual de usuario descargar pdf (Pagina 57)

Chapter 2 — Configuring the PB22 and PB32

PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 45

Changing Configuration Settings Using SmartSystems

Foundation

You can use the SmartSystems console to change configuration

settings on your printer. The printer ships with the SmartSystems

client loaded on it. The console is part of SmartSystems Foundation

and is available from the Intermec web site. To download

SmartSystems Foundation, go to www.intermec.com/products/

smrtsysfoundation/index.aspx.

Upgrading the Firmware

The latest firmware and software is available for download from the

Intermec web site at www.intermec.com. You can upgrade the

firmware on your printer using:.

• PrintSet. You can download PrintSet from the downloads page for

the printer on the Intermec web site at www.intermec.com.

• the printer home page.

• SmartSystems

Foundation.

• a serial cable and a communications program like HyperTerminal.

Upgrading the Printer Firmware Using PrintSet

You can only upgrade your printer using PrintSet when the printer is

running IPL, Fingerprint, or ESC/P printer languages. To upgrade the

printer using PrintSet, you need to install PrintSet to your PC and

purchase a serial cable (P/N 075497).

To upgrade the printer firmware using PrintSet

1 If your printer is running ZSim or DSim, change the printer

language to IPL, Fingerprint, or ESC/P. For help, see “Changing

the Printer Language” on page 7.

When upgrading your firmware, make sure the battery in the

printer is fully charged. If the printer loses power during the

upgrade, the printer may be permanently damaged.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 103 104

Sin comentarios

Intermec PB22 Manual de usuario Pagina 57