Intermec PB22 Manual de usuario descargar pdf (Pagina 22)

Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer

10 PB22 and PB32 Mobile Label and Receipt Printer User’s Guide

Understanding the Printer Sounds

The printer plays sounds in response to several actions that you can

take with the printer. Use the following table to understand when the

sounds occur and what they mean.

Understanding the Backlight

The screen backlight on the printer behaves the same way as a screen

saver on your PC. After a set amount of time elapses without any user

interaction, the backlight goes off. The screen backlight turns on

when:

• the printer begins printing.

• you press a button.

• you connect the printer to external power.

• you are communicating with or sending data to the printer.

Use the Setup menu to change change the amount of time the

backlight turns off. Options for backlight are always off, always on, 5

seconds, 10 seconds, 20 seconds, 30 seconds, or 60 seconds.

Understanding the Printer Sounds

Sound Occurs When:

Power

• You insert a battery in the printer.

• The printer starts charging the battery.

• You plug in the AC adapter.

Hardware You open the media door, close the media door, or insert a

cable.

Button You press any of the buttons.

Error

• The printer cannot feed paper or print a job because of

a hardware issue such as the media door open, a paper

jam, or there is no media.

• An error occurs such as a paper jam, a print error, or the

printer is out of range.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 103 104

Sin comentarios

Intermec PB22 Manual de usuario Pagina 22