Intermec PB22 Manual de usuario descargar pdf (Pagina 23)

Chapter 1 — Using the PB22 and PB32 Mobile Label and Receipt Printer

PB22 and PB32 Mobile Label and Receipt Printer User’s Guide 11

Using the Batteries

The printer uses a rechargeable 7.4 V 2300 (typical) mAh lithium-ion

battery (Model AB27) for power. You must fully charge the battery

before you can use the printer. The battery retains a charge for up to

five days when the printer is in Standby mode.

A fully charged battery can usually print over 300 6-inch labels (PB32)

or 500 6-inch labels (PB22) at 25% print density. When the printer

reports low battery, it can usually print over 50 6-inch labels at 10%

print density. The number of labels you can print varies with the:

• Age of the battery.

• Temperature and humidity of the operating environment.

• Printer configuration, including network connection settings.

• Type of media loaded in the printer.

• Amount of data printed for each label.

• Threshold at which you configure the low battery warning.

Dispose of used batteries promptly. Keep away from children.

Use Intermec Model AB27 battery only. Use of another battery

may present a risk of fire or explosion.

The Model AB27 battery may present a fire or chemical burn

hazard if mistreated. Do not disassemble, heat above 100°C

(212°F), or incinerate.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 103 104

Sin comentarios

Intermec PB22 Manual de usuario Pagina 23