Intermec IF61 Manual de usuario descargar pdf (Pagina 107)

Chapter 4 — Managing, Troubleshooting, and Upgrading the IF61

IF61 Fixed Reader User’s Manual 93

To open a Telnet connection

1 On your desktop PC, start Telnet.

2 In the Telnet window, type open

xxx.xxx.xxx.xxx, where

xxx.xxx.xxx.xxx is the IP address of the IF61.

3 Press Enter. The login prompt appears. The login and password

are the same as currently enabled for the web browser interface

(default is intermec).

4 Enter the login and press Enter. The password prompt appears.

5 Enter the password and press Enter. The $-prompt appears. Your

Telnet session with the IF61 is established.

Using a Serial Communications Program

To access the Linux shell via a communications program, you need a

null-modem cable (P/N 059167).

To access the Linux shell through a serial communications program

1 Open a serial connection to the IF61 as described in the next

section, “Opening a Serial Connection to the IF61.”

2 Type the login for the IF61 (default is intermec) and press

Enter.

Note: For more secure access to the IF61, use a Secure Shell (SSH)

connection. For help, see “Opening a Secure Shell (SSH)

Connection” on page 92.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 151 152

Sin comentarios

Intermec IF61 Manual de usuario Pagina 107