Intermec IF61 Manual de usuario descargar pdf (Pagina 23)

Chapter 1 — Getting Started

IF61 Fixed Reader User’s Manual 9

Connecting to the IF61

By default, the IF61 is configured to be a DHCP client and accepts

offers from any DHCP server. Therefore, the IF61 will work out of the

box if you connect it to your network and use a DHCP server to assign

it an IP address.In this case, you configure the IF61 using the web

browser interface from a desktop PC. For help, see “Using the Web

Browser Interface” on page 11.

However, if you are not using a DHCP server to assign an IP address,

you use a serial communications program such as HyperTerminal to

assign a static IP address. For help, see the next section, “Assigning an

Initial IP Address.”

After the IF61 has been assigned an IP address, connect it to your

network and then complete the configuration by using a web browser

interface from a desktop PC. For help, see “Using the Web Browser

Interface” on page 11.

Assigning an Initial IP Address

Follow this procedure to assign an initial IP address to the IF61. After

you assign the IP address, connect the IF61 to your network and use

the web browser interface to complete the configuration.

To assign an initial IP address

1 Open a serial connection to the IF61. For help, see “Opening a

Serial Connection to the IF61” on page 94.

Note: If configuration via a serial connection has been disabled on the

IF61, you need to restore default settings before you use this

procedure. For more information, see “Using a Serial

Communications Program” on page 93.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 151 152

Sin comentarios

Intermec IF61 Manual de usuario Pagina 23