Intermec IF61 Manual de usuario descargar pdf (Pagina 40)

Chapter 2 — Configuring Network Settings

26 IF61 Fixed Reader User’s Manual

Setting the 802.11 Network Mode

When you set the Network Mode parameter, you should be aware of

any restrictions on the use of specific frequency bands in your area.

To eliminate interference to Mobile Satellite Systems (MSS)

communications, regulations in the United States, Canada, Australia,

and New Zealand require only indoor use if you are operating the

IF61 in the 5150-5250 MHz range.

Australia and New Zealand also require only indoor use if you are

operating the IF61 in the 5250-5350 MHz range.

All European countries require only indoor use if you are operating

the IF61 in the 5150-5350 MHz range.

To comply with regulations in these locations, set Network Mode to

Auto or 802.11a only if the IF61 is being used indoors.

Configuring Common Network Settings

Common network settings are configuration items that apply to all

IF61 network interfaces.

This section explains how to use the web browser interface to

configure these common network settings:

• Hostname

Router (Gateway) IP address of the router that will forward frames if the IF61 will

communicate with devices on another subnet. The IP address has the

form x.x.x.x, where x is a number from 0 to 255.

IPv6 Autoconfigure Enables IPv6 automatic configuration for the radio. Clear this check

box to disable IPv6 auto-configuration on the IF61.

Auto-configuration is enabled by default. If you disable auto-

configuration, you need to specify an IPv6 address, subnet mask, and

router.

IPv6 Address 128-bit IPv6 address for the IF61.

IPv6 Subnet Mask 1 to 128-bit IPv6 subnet mask.

IPv6 Router (Gateway) 128-bit address for the IPv6 router.

802.11 Radio Settings Descriptions (continued)

Setting Description

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 151 152

Sin comentarios

Intermec IF61 Manual de usuario Pagina 40