Intermec IF61 Manual de usuario descargar pdf (Pagina 54)

Chapter 2 — Configuring Network Settings

40 IF61 Fixed Reader User’s Manual

3 Configure the parameters for Dynamic WEP security. For help, see

the next table.

4 Click Activate Changes to save your settings and immediately

make them active.

Configuring WPA Personal (PSK) Security

1 From the menu, click Network Configuration > 802.11 or 802.11

Configuration. The 802.11 Configuration screen appears.

Parameters for Dynamic WEP/802.1x Security

Parameter Description

Allowed EAP

Authentication

Method

Specifies which 802.1x authentication protocol (TLS,

TTLS, PEAP, or LEAP) the IF61 sends to the

authentication server.

Username User name for the selected protocol.

Password Password for the selected protocol.

Validate CA

Certificate

Enables or disables verification of the server certificate

signature against the certificate installed on the IF61. If

you enable verification, you need to specify the CA

certificate common name.

CA Certificate

Common Name

Common name for the server certificate.

Reject Expired

Certificates

Check this check box to reject expired certificates.

Enable mixed cell Enable this mode to allow the IF61 to communicate with

CCX mixed-cell access points. Mixed-cell use allows both

WEP and non-WEP clients to communicate with the

same access point.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 151 152

Sin comentarios

Intermec IF61 Manual de usuario Pagina 54