Intermec CN2 Manual de usuario descargar pdf (Pagina 107)

Chapter 5 — Troubleshooting and Maintaining the CN2

CN2 Handheld Computer User’s Manual 95

but

The screen goes blank immediately. The screen remains blank

for a few seconds, the Refreshing the File System dialog box

appears, and the CN2 warm boots.

To warm boot the CN2 using the Power key

1 Press and hold the Power key for approximately 10 seconds.

Note: After about 5 seconds, the backlight toggles. Keep

holding the Power key for another 5 seconds until the

backlight flashes.

2 Release the Power key. The screen remains blank for a few

seconds, the Refreshing the File System dialog box appears,

and the CN2 warm boots.

Cold Booting the CN2

If the CN2 or application is locked up and does not respond to a

warm boot, follow this procedure to perform a cold boot. When

you perform a cold boot, all data in your RAM storage is

deleted.

To cold boot the CN2

1 Open the battery door and remove the battery. For help, see

“Removing the Battery” on page 8.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 133 134

Sin comentarios

Intermec CN2 Manual de usuario Pagina 107