Intermec CN2 Manual de usuario descargar pdf (Pagina 109)

Chapter 5 — Troubleshooting and Maintaining the CN2

CN2 Handheld Computer User’s Manual 97

Upgrading the Operating System

When you upgrade the operating system, you erase the current

configuration and replace it with the new default configuration.

You will need to set the network communications parameters on

the CN2 to reestablish communications with the other devices

in the wireless network.

To upgrade the OS, you need:

• an SD card formatted as FAT16.

Note: The CN2 currently supports SanDisk SD cards only.

Intermec cannot guarantee that other SD cards will work

with the CN2.

• an SD card reader.

• the latest upgrade ZIP file. This file is available from the

Intermec web site at www.intermec.com. Go to Service &

Support > Downloads. Make sure the file you select is for

your language and that it has an SD at the end of the file

name.

To upgrade the operating system

1 Download the latest upgrade ZIP file from the Intermec web

site to your desktop PC.

2 Unzip the files on your desktop PC.

3 Place the SD card in the SD card reader.

4 Copy the nk.bin and eboot.bin files to your SD card. Place

the files in the SDMMC Disk folder.

5 Open the battery door and remove the battery. For help, see

“Removing the Battery” on page 8.

6 Insert the SD card into the CN2. For help, see “Using the

Optional SD Card” on page 22.

7 Using the end of the stylus, press the Reset button on the

inside of the battery compartment.

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 133 134

Sin comentarios

Intermec CN2 Manual de usuario Pagina 109