Intermec CN2 Manual de usuario descargar pdf (Pagina 65)

Chapter 3 — Adding the CN2 to the Network

CN2 Handheld Computer User’s Manual 53

2 If you plan to use TLS for authentication, load a user and

root certificate on your CN2. For help, see “Loading

Certificates” on page 59.

3 Open Intermec Settings.

4 Choose Communications > 802.11 Radio > Security

Settings > Microsoft Security.

5 For Infrastructure Mode, choose Infrastructure.

6 For Network Authentication, choose WPA-PSK and tap

the Save icon in the upper right corner of the screen. Data

Encryption is set to TKIP by default.

7 For Pre-Shared Key, enter the pre-shared key or the

passphrase.

The pre-shared key must be a value of 32 hex pairs preceded

by 0x for a total of 66 characters. The value must match the

key value on the authenticator. The passphrase must be from

8 to 63 characters. After you enter a passphrase, the CN2

internally converts it to a pre-shared key.

This value must match the passphrase on the authenticator.

8 Exit Intermec Settings.

Using 802.1x Security

802.1x security provides centralized user authentication using an

authentication server, authenticators (access points), and

supplicants. These components communicate using an EAP

authentication type, such as TLS (Transport Layer Security) or

PEAP (Protected Extensible Authentication Protocol). 802.1x

security provides data encryption using dynamic WEP key

management.

To use 802.1x security, you need:

• an authentication server.

Note: You can also use a MobileLAN access WA2X product

as an authentication server. For help, see the MobileLANaccess

WA2X System Manual (P/N 073915).

• an access point with an 802.11b/g radio.

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 ... 133 134

Sin comentarios

Intermec CN2 Manual de usuario Pagina 65