Intermec CN2 Manual de usuario descargar pdf (Pagina 25)

Chapter 1 — Using the CN2 Handheld Computer

CN2 Handheld Computer User’s Manual 13

Using the Power Key

The Power key is the round yellow key in the upper left corner

of both keypads.

Actions You Can Perform With the Power Key

Action Do This Description

To turn on the

CN2

Press and release the

Power key.

Your CN2 resumes where it was when you

turned it off. If you are using WPA or 802.1x

security, the computer may need to

reauthenticate before it starts your application.

To turn off the

CN2

Press the Power key

for 2 to 3 seconds

and then release it.

Your CN2 enters Suspend mode. In Suspend

mode, the CN2 continues to supply power to

all memory, but turns off power to most

hardware. This power-saving feature is

designed to prolong battery life.

To toggle the

backlight

Press the Power key

for 5 to 6 seconds

and then release it.

The CN2 backlight toggles (turns on or off)

but the CN2 continues running.

To warm boot the

CN2

Press the Power key

for 10 seconds and

then release it.

For details, see “Warm Booting the CN2” on

page 94.

Note: If your CN2 does not resume after you press the Power

key, your battery may be too low to supply power. Replace or

charge the battery. If replacing or charging the battery does not

solve the problem, see “Booting the CN2” on page 94.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 133 134

Comentarios a estos manuales

Sin comentarios

Intermec CN2 Manual de usuario Pagina 25

Comentarios a estos manuales

Relacionado con productos y manuales para Computadoras móviles de mano Intermec CN2