Intermec CN2 Manual de usuario descargar pdf (Pagina 33)

Chapter 1 — Using the CN2 Handheld Computer

CN2 Handheld Computer User’s Manual 21

You can change the beeper volume for your needs and

environment. You can set the beeper volume to off, low (quiet),

medium, high (loud), and very high (very loud – default

setting).

To change the beeper volume

1 Tap the Start icon and tap Intermec Settings. The Intermec

Settings application appears.

2 Tap Device Settings > Beeper > Volume.

3 Select a volume level.

4 Tap

to save your settings and tap X to exit Intermec

Settings.

Scanning Bar Codes

Use the scanner to scan and enter bar code data. The CN2

supports the scanning of 1D linear bar codes.

When you unpack the CN2, all the supported bar code

symbologies are enabled:

• Codabar

• Code 39

• Code 128

• Interleaved 2 of 5

• UPC/EAN

• MSI

Use Intermec Settings to enable and disable symbologies.

For help using Intermec Settings, see “Configuring the CN2

Locally With Intermec Settings” on page 32.

To scan a bar code label with the CN2

1 Press the Power key to turn on the CN2.

2 Point the scanner window at the bar code label and hold the

computer at a slight angle 15 to 25 cm (6 to 10 in) from the

label.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 133 134

Sin comentarios

Intermec CN2 Manual de usuario Pagina 33