Intermec CN2 Manual de usuario descargar pdf (Pagina 62)

Chapter 3 — Adding the CN2 to the Network

50 CN2 Handheld Computer User’s Manual

If you choose TTLS or PEAP:

a Select User name, select the text in the text box, use the

input panel to type your user name, and tap Save.

b For Password prompt, make sure that Enter password

now is selected.

Note: You can use Prompt for password to troubleshoot

your connection to the network if you have problems.

c Select User Password, select the text in the text box, use

the input panel to type your user password, and tap Save.

d For Validate Server Certificate, choose Enabled and tap

Save.

Note: You must have the date on the CN2 set correctly

when you enable Validate Server Certificate.

If you choose TLS:

a For Validate Server Certificate, choose Enabled and tap

Save.

b You must enter a User Name and Subject Name. You can

also enter a Server Common Name if you want to increase

your level of security.

8 Exit Intermec Settings.

To enable WPA-PSK security on your CN2 with Funk security

1 Make sure you have configured the communications and

radio parameters on your CN2.

2 Make sure you have selected Funk as your security choice, as

described in “Choosing Between Microsoft Security and Funk

Security Software” on page 45.

3 Open Intermec Settings.

4 Tap Communications > 802.11 Radio > Security Settings

> Funk Security > Profile.

5 For Association, choose WPA and tap Save.

6 For Authentication, choose None and tap Save.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 133 134

Sin comentarios

Intermec CN2 Manual de usuario Pagina 62