Intermec CN2 Manual de usuario descargar pdf (Pagina 61)

Chapter 3 — Adding the CN2 to the Network

CN2 Handheld Computer User’s Manual 49

To use WPA security, you need:

• an authentication server (Enterprise mode only).

Note: You can also use a MobileLAN access WA2X product

as an authentication server. For help, see the MobileLANaccess

WA2X System Manual (P/N 073915).

• user and root certificates (if you plan to use TLS for

authentication)

• an access point with an 802.11b/g radio that supports WPA.

• a CN2 with the 802.11b/g radio and the 802.1x/WPA

security option.

Configuring WPA Security With Funk Security

Use these procedures to set WPA-802.1x and WPA-PSK

security on your CN2 with Funk security.

To enable WPA-802.1x security on your CN2 with Funk security

1 Make sure you have configured the communications and

radio parameters on your CN2.

2 Make sure you have selected Funk as your security choice, as

described in “Choosing Between Microsoft Security and Funk

Security Software” on page 45.

3 If you plan to use TLS for authentication, load a user and

root certificate on your CN2. For help, see “Loading

Certificates” on page 59.

4 Open Intermec Settings.

5 Tap Communications > 802.11 Radio > Security Settings

> Funk Security > Profile.

6 For Association, choose WPA and tap the Save icon in the

upper right corner of the screen. Encryption is set to TKIP

by default.

7 For Authentication, choose TTLS, PEAP, or TLS and tap

Save.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 133 134

Sin comentarios

Intermec CN2 Manual de usuario Pagina 61