Intermec PM43c Manual de usuario descargar pdf (Pagina 134)

Appendix B — Default Settings

122 PM43 and PM43c Mid-Range Printer User Manual

Print Quality Settings

This section describes print quality settings. To view these settings:

• From the printer Main Menu, select Settings > Printing > Print

Quality.

• From the printer web page, click the Configure tab > Printing >

Print Quality.

Stop Adjust Sets the length of media the

printer feeds (positive value) or

retracts (negative value) after

printing a label. Unit of

measurement is defined in the

Unit of Measure parameter. Range

is -9999 to +9999.

Media Calibration

Mode

Selects the mode the printer uses

to calibrate media. Use Slow if the

printer has trouble identifying

gaps or marks in media.

Fast

Length (Slow Mode) If Media Calibration Mode is set

to Slow, the printer prints the

media length plus 10 mm. This

value sets an additional amount

of media to be printed. Unit of

measurement is defined in the

Unit of Measurement parameter.

Range is 0 to 3200.

LTS Sensitivity Level Sets the sensitivity of the label

taken sensor. Range is 0 to 14.

Supported when the Cutter or

Label Dispenser accessories are

installed.

Setting Description Default

Print Speed Sets how fast the printer prints labels. The

unit of measure is defined in the Unit of

Measure parameter.

100

Media Sensitivity Sets the level of sensitivity of the media to the

printhead heat for media and ribbon.

Variable

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 149 150

Comentarios a estos manuales

Sin comentarios

Intermec PM43c Manual de usuario Pagina 134

Comentarios a estos manuales

Relacionado con productos y manuales para Impresoras De Etiquetas Intermec PM43c