Intermec PM43c Manual de usuario descargar pdf (Pagina 137)

Appendix B — Default Settings

PM43 and PM43c Mid-Range Printer User Manual 125

System I/O Settings

This section describes system I/O settings for the printer. To view these

settings:

• From the printer Main Menu, select Settings > System Settings >

Manage I/O.

• From the printer web page, click the Configure tab > System

Settings > Manage I/O.

System Network Services

This section lists the network services you can manage from the

printer. You will only see Manage Services from the menus if you have

an Ethernet or Wireless module installed in the printer. To view these

services:

• From the printer Main Menu, select Settings > System Settings >

Manage Services.

• From the printer web page, click the Configure tab > System

Settings > Manage Services.

Feed Key Access Determines if the Feed button on the

printer keypad is enabled or disabled.

Enable

Volume Sets the printer volume. Off

Setting Description Default

Wireless 802.11 Determines if the printer is allowed to

communicate using its 802.11 radio.

Supported only if the optional

Wi-Fi+Bluetooth module is installed.

Enable

Bluetooth Determines if the printer is allowed to

communicate using its Bluetooth radio.

Supported only if the optional

Wi-Fi+Bluetooth module is installed.

Enable

RFID Determines if the printer is allowed to

communicate using its RFID radio. Supported

only if the RFID module is installed.

Enable

Virtual COM Determines if you can enable the USB port to

be used as a virtual serial port.

Disable

1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 149 150

Sin comentarios

Intermec PM43c Manual de usuario Pagina 137