Intermec PM43c Manual de usuario descargar pdf (Pagina 48)

Chapter 2 — Set Up the Printer

36 PM43 and PM43c Mid-Range Printer User Manual

Print on RFID Media

Media containing RFID tags is slightly thicker where the RFID tag is

located. The slight thickness of this part of the label may affect print

quality. For thermal transfer labels, Intermec recommends using high-

quality ink ribbon.

To achieve the best possible print quality, follow these guidelines:

• After you load RFID media, restart the printer or run the RFID

calibration wizard on a full touch printer. To start the RFID

calibration wizard, go to Wizards > Calibration > RFID.

• If necessary, modify the TAGADJUST variable to make sure the

RFID labels are properly aligned with the antenna.

• If necessary, avoid printing on the thickest part of the label.

For help configuring RFID parameters, see the Intermec Fingerprint

Command Reference Manual or the IPL Command Reference

Manual.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 149 150

Sin comentarios

Intermec PM43c Manual de usuario Pagina 48