Intermec PM43c Manual de usuario descargar pdf (Pagina 54)

Chapter 3 — Connect the Printer

42 PM43 and PM43c Mid-Range Printer User Manual

3 Turn the printer on.

If your printer uses a DHCP server to assign IP addresses, the IP

address appears in the lower left corner of the screen.

• For an icon printer, use Intermec PrintSet to retrieve the printer

IP address.

If you are not using a DHCP server to automatically assign IP

addresses to devices in your network, you must set a static IP

address and other network information manually. Continue with

the next step.

4 For a non-DHCP network:

• For a full touch printer, from the Main Menu select Settings >

Communications > Ethernet > IPv4 or IPv6 and change the

settings as needed.

• For an icon printer, configure the Ethernet settings through

PrintSet.

About Wireless Communications

The printer supports wireless communications when the optional

Wi-Fi/Bluetooth module is installed.

You can configure wireless communications:

• from the printer web page.

• from the printer Main menu if your printer has full touch display

front panel.

IPv4 and IPv6 Ethernet Settings

Setting Default

(IPv4) IP Assignment Method DHCP

(IPv4) IP Address 0.0.0.0

Subnet Mask 0.0.0.0

Default Router 0.0.0.0

DHCP Response Broadcast

(IPv6) IP Assignment Method Automatic

(IPv6) IP Address Automatic

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 149 150

Sin comentarios

Intermec PM43c Manual de usuario Pagina 54