Intermec PM43c Manual de usuario descargar pdf (Pagina 139)

Appendix B — Default Settings

PM43 and PM43c Mid-Range Printer User Manual 127

Odometer (Printer) Sets the length of media (in meters) that the

printer prints before the Odometer (Printer)

alert is sent. Unit of measurement is defined

in the Unit of Measure parameter. Range is 0

to 4294967295.

Odometer (Current

Printhead)

Sets the length of media (in meters) that the

printer prints before the Odometer (Current

Printhead) alert is sent, if this alert is

configured. Unit of measurement is defined

in the Unit of Measure parameter. Range is 0

to 4294967295.

Replace Printhead Sets the length of media (in meters) that the

printer prints before the Replace Printhead

alert is sent, if this alert is configured. Unit of

measurement is defined in the Unit of

Measure parameter. Range is 0 to

4294967295.

Clean Printhead Sets the length of media (in meters) that the

printer prints before the Clean Printhead

alert is sent, if this alert is configured. Unit of

measurement is defined in the Unit of

Measure parameter. Range is 0 to

4294967295.

Faulty Dot Sets the number of faulty dots on the

printhead before the Faulty Dot alert is sent,

if this alert is configured. Range is 0 to

4294967295.

Ribbon Low

Diameter

Sets the minimum diameter of the ribbon

roll before the Ribbon Low alert is sent, if

this alert is configured. Range is 0 to 200

mm.

Setting Description Default

1 2 ... 134 135 136 137 138 139 140 141 142 143 144 ... 149 150

Sin comentarios

Intermec PM43c Manual de usuario Pagina 139