Intermec PM43c Manual de usuario descargar pdf (Pagina 42)

Chapter 2 — Set Up the Printer

30 PM43 and PM43c Mid-Range Printer User Manual

3 Feed media through the slot in the back of the printer (or from the

slot in the bottom of the printer) and route it through the print

mechanism.

4 Turn the printhead lift lever clockwise to close the printhead.

5 Close the media cover.

6 Press the Print button to advance the media. If you are switching

to a new type of media, you need to calibrate the sensors on the

printer.

Load Ribbon

Thermal transfer printing provides a durable printout that is less

vulnerable to chemicals, heat, and sunlight than direct thermal

printing. Make sure you select a ribbon type that matches the media

you are using and that you configure the printer for thermal transfer

media.

The printer supports thermal transfer ribbon rolls with the ink-coated

side facing either inward or outward. To determine which type of

ribbon you have, use a pen or other sharp object to scratch through the

ribbon against a piece of paper. If you see a mark on the paper, your

ribbon is wound ink out.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 149 150

Sin comentarios

Intermec PM43c Manual de usuario Pagina 42